Millrock Partner Reports Drill Results

VANCOUVER, British Columbia, Aug. 16, 2018 (GLOBE NEWSWIRE) -- Millrock Resources Inc. (TSX-V: MRO, OTCQX: MLRKF) ("Millrock") announces that PolarX Mining Inc. (“PolarX”) (PXX.AX) has reported the first assay results for 2018 from drilling at the Zackly copper-gold deposit within its Alaska Range Project.

Results from hole ZX-18020 are presented below:

ZX-18020 From (m) To (m) Interval (m) Cu % Au g/t Ag g/t
  2.5 57.1 54.6  0.6* 2.8   9.5
Including: 2.5 14.0 11.5 0.6 5.3 12.0
and: 18.3 27.1 8.8 0.5 5.8   4.5
and: 32.0 43.3 11.3 0.8 1.8 23.3
and: 46.2 57.1 10.9   1.0* 1.6   3.9

* These intersections include an uncut assay grading 27.3% Cu over a narrow interval of 0.3 meters between 56.7 meters and 57.0 meters The drill intersection reported is apparent thickness. Due to the structural complexity in this area, in which several conjugate faults have been inferred, the true thicknesses of the mineralization cannot be ascertained until further drilling has been undertaken.

The drill intersection includes a 0.3 meter down-hole thickness from 56.7 meters which assayed 27.3% copper, 2.5 grams per tonne (“g/t”) gold and 82.5 g/t silver. The gold and copper mineralization in ZX-18020 occurs in garnet bearing skarn alteration located above a fault. Visible copper mineralization occurs in veins, fractures, and interstitial to grains, as native copper flecks and silicified chalcocite with variation in intensity throughout each mineralized zone. Gold is also present throughout this zone, although no visible gold was observed in this hole. Further information, maps and cross sections are available of the PolarX website.

Exploration at the Alaska Range Project is being done by Millrock on behalf of PolarX. Millrock presently owns 6.44% of the issued and outstanding PolarX shares and is entitled to certain milestone and royalty payments on portions of the project.

Quality Control – Quality Assurance
Millrock adheres to stringent Quality Assurance – Quality Control (QA/QC) standards. Drill core samples are kept in a secure location at all times. Representative half core samples were collected and assayed at ALS Chemex laboratories in Vancouver, Canada and Reno, Nevada, USA, after being prepared at the preparatory laboratory in Fairbanks, Alaska, USA. Gold was analyzed by Fire Assay (specifically ALS code Au-AA25 - Au by fire assay and AAS using a 30 gram nominal sample weight). Other elements (33 in total including copper) were analyzed using ALS method code ME-ICP61 which involves a four-acid digest and an ICP-MS finish. Over range (Cu >= 1%) was analyzed using ALS method code ME-OG62 which involves a four-acid digest and an ICP-AES or AAS finish. The following QA/QC protocols have been adopted for this program: 1) Blank samples and Standards – Certified Reference Material (CRM’s) account for approximately 10% of core samples submitted to the laboratory, 2) QA/QC samples are spaced no more than ten samples apart, 3) geologists instruct the lab to run clean rock through equipment immediately following samples containing visible native gold and / or copper, and 4) the laboratory prepares coarse crush and fine pulverized duplicate samples and analyzes the duplicates. All results from blanks, standards and duplicates were reviewed and found to be accurate within acceptable tolerances for results obtained to date. The Qualified Person is of the opinion that the results reported in this press release are reliable.

Qualified Person
The scientific and technical information disclosed within this document has been prepared, reviewed and approved by Gregory A. Beischer, President, CEO and a director of Millrock Resources. Mr. Beischer is a Qualified Person as defined in NI 43-101.

About Millrock Resources Inc.
Millrock Resources Inc. is a premier project generator to the mining industry. Millrock identifies, packages and operates large-scale projects for joint venture, thereby exposing its shareholders to the benefits of mineral discovery without the usual financial risk taken on by most exploration companies. The company is active in Alaska, British Columbia, the southwest USA and Sonora State, Mexico. Funding for drilling at Millrock’s exploration projects is primarily provided by its joint venture partners. Business partners of Millrock have included some of the leading names in the mining industry: Centerra Gold, First Quantum, Teck, Kinross, Vale, Inmet, Altius, and Riverside. Millrock is a major shareholder of junior explorers PolarX Ltd. and Sojourn Exploration Inc.

“Gregory Beischer”
Gregory Beischer, President & CEO

Melanee Henderson, Investor Relations
(604) 638-3164
(877) 217-8978 (toll-free)

Some statements in this news release contain forward-looking information. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. Such factors include without limitation the completion of planned expenditures, the ability to complete exploration programs on schedule and the success of exploration programs.

Subscribe to the RSD email list and get the latest resource stock activity directly to your inbox, for free.

Part of the Stock Digest family of websites

Small Cap Stock Digest



Name Last Change
DOW 27110.80 0.13%
S&P 500 3005.70 0.26%
NASDAQ 8186.02 0.40%
TSX 16834.75 0.50%
TSX-V 586.90 0.00%

Resource Commodities

Name Last Change
Gold 1501.00 0.02%
Silver 17.85 0.78%
Copper 2.61 2.610
Platinum 901.00 0.67%
Oil 59.34 6.00%
Natural Gas 2.67 0.49%
Uranium 25.38 0.99%